The letters EMC stand for electro-magnetic compatibility and likewise EMI stands for electro-magnetic interference. There are standards that are used to determine whether or not a test article is susceptible to, or emits, an unacceptable level of interference. It can be either radiated or conducted in form. The standards are defined by regulatory agencies worldwide and are specific to particular scenarios.
Learn more about selecting EMC and EMI equipment by reading our blog post: "Test Equipment for EMC/EMI".
Description |
||||
emtest | UCS500N5 | Multifunction Test Generator, 5.5kV (EFT/Burst, Surge & Power Fail) | DETAILS | |
EMC Partner | TRA2000IN6 | Transient Test System, 6kV | DETAILS | |
EMC Partner | TRA2000 | Transient Test System | DETAILS | |
Haefely | PSURGE 8000 | Surge Platform Test System | DETAILS | |
Haefely | PSURGE 4010 | Combination Wave Surge Generator | DETAILS | |
Haefely | PIM150 | Oscillating Wave Surge Module, 100 kHz & 1 MHz | DETAILS | |
Haefely | PIM120 | Telecom Test Impulse Module, 10/700 microseconds - 7.4kV (15, 40 Ohm) | DETAILS | |
Haefely | PIM100 | Combination Wave Impulse Module, 1.2/50us & 8/20us | DETAILS | |
Haefely | PEFT4010 | EFT / Burst Generator | DETAILS | |
Haefely | PCD300 | 3-Phase Coupling / Decoupling Network | DETAILS | |
Haefely | PCD130 | 3-Phase Coupling / Decoupling Network | DETAILS | |
Haefely | PCD126A | Manual Surge Coupling Unit | DETAILS | |
Haefely | PCD121 | Manual Surge Coupling Unit | DETAILS | |
Haefely | PCD120 | 4 line Telecom Impulse CDN for PIM 120 | DETAILS | |
emtest | NX5 | Compact Immunity Test System | DETAILS | |
Teseq (Schaffner) | NSG4070 | Conducted RF Immunity Test System | DETAILS | |
Teseq (Schaffner) | NSG3060A | Multifunction Conducted Immunity Surge Generator | DETAILS | |
Teseq (Schaffner) | NSG3060 | Multifunction Conducted Immunity Surge Generator | DETAILS | |
Keysight / Agilent | N9039A | RF Preselector | DETAILS | |
Keysight / Agilent | N9038A | MXE EMI Receiver | DETAILS | |
Haefely | MAG100 | AC Power Frequency Magnetic Field Test System | DETAILS | |
Rohde & Schwarz | ESW8 | EMI Test Receiver, 2 Hz to 8 GHz | DETAILS | |
Rohde & Schwarz | ESW44 | EMI Test Receiver, 2 Hz to 44 GHz | DETAILS | |
Rohde & Schwarz | ESW26 | EMI Test Receiver, 2 Hz to 26.5 GHz | DETAILS | |
Rohde & Schwarz | ESVS30 | EMI Test Receiver, 20 MHz - 1 GHz | DETAILS |