Agilent 86130A, Keysight 86130A, HP 86130A
BitAlyzer Error Performance Analyzer, 50 Mb/s - 3.0 Gb/s

Download Product Datasheet

Product Overview

The Agilent 86130A BitAlyzer is a combination of Pattern Generator and Error Detector and is designed to quickly solve design and manufacturing problems. Complementing the 86100A Infiniium DCA, the 86130A brings a new level of insight into your testing toolbox. Powerful analysis, easy setting and use, together in a small, expandable package makes digital testing easy.

Other features and specifications of the Agilent / HP 86130A BitAlyzer include:

• Pattern Generator Specs:
• Operating Frequency: 50 MHz to 3.6 GHz
• 50 Mb/s to 3.6 Gb/s with external clock
• 50 Mb/s to 3.0 Gb/s with internal clock source
• Frequency Accuracy: ±20 ppm
• Excellent waveform performance
• Easy setup
• Test Patterns:
• • 2^N-1 PRBS
  • 2³¹-1, 2²³-1, 2¹⁵-1, 2¹⁰-1, 2⁷-1
  • 2^N PRBS
  • 2²³, 2¹⁵, 2¹⁰, 2⁷
  • Variable Mark Density
  • 1/8, 1/4, 1/2, 3/4, 7/8
  • User Defined Patterns
  • Variable length patterns from 1 to 8 Mbits
  • Alternating Patterns
  • Change between two equal length user patterns, each up to 4 Mbits long. Changeover is synchronous with the end of a pattern, under the control of the front panel or the Auxiliary Input.
  • Error Add
  • Single, continuously variable between 1x10-2 and 1x10-9, and user specified bursts of errors.
  • Pattern Editor
  • Fully flexible pattern editor included with “cut”, “copy” and “paste” functions.
• Error Detector Specs:
• Operating Frequency: 50 MHz to 3.6 GHz
• Test Paterns: As specified for Pattern Generator
• Auto-Align
• Includes synchronizing, data polarity, clock/ data align, clock invert, 0/1 threshold center.
• Data In Delay
• Manual Data In Delay/Auto Clock-Data Align
• Threshold Setting
• Manual set, Average DC level set, Auto 0/1 center
• Synchronization
• Manual, Automatic, Burst*, Capture*. Sync threshold adjustable from 10-¹ to 10-⁹.
• Results
• Accumulated measurements may be run once, repetitively or manual start/ stop. Delta (instantaneous) BER always available.
• Manual start/ stop
• Time: Accumulate for periods from 1second to 100 days
• Errors: Until at least 10/100/1000 errors
• Bits: 107 to 1015 bits
• Result Displays
• Delta BER Results
• Delta Error Ratio, Delta Error Count, Graph of BER vs Time
• Accumulated Results
• Bit Count, Error Ratio, Error Count, Errored One Count, Errored Zero Count, Error Free Seconds, Errored Seconds, Elapsed Accumulation Time, Sync Loss Seconds, Power Loss Seconds, Graph vs Time
• Eye Results
• Eye Width, Eye Height, Eye Voltage Center value, Eye Time Center value, Delta Error Ratio at Eye Center on completion of Autoalign
• SYNTHESYS Error Analysis:
• Graphs of Burst Lengths, Error Free Intervals, Correlation Analysis, Pattern Sensitivity Analysis, Block Analysis, Strip Chart