Pacific Power Source 390AMXT
AC Power Source, 9kVA

Download Product Datasheet

Product Overview

RENT PACIFIC POWER 390AMXT Power Source (call for availability)

The Pacific Power Source (PPS) 390AMXT Power Source includes all the high performance designs of the standard PPS 390AMX power source model and is additionally equipped with an output transformer that provides an alternate output voltage range. Selection of direct or transformer coupled range is performed by the controller via front panel or bus command.

The PPS 390AMXT Power Source is conservatively designed and output power ratings are based on the most severe combination of input line, output voltage, power factor, and temperature. This design allows the PPS 390AMXT Power Source to excel when delivering the high peak load currents demanded in the AC test environment.

Great emphasis has been placed on low acoustic noise, ease of installation, and maximum power per cubic inch of rack space. Control and operating features provide a high degree of application versatility and ease of use for the test engineer. Applications range from simple, manually controlled frequency conversion to harmonic testing and sophisticated bus programmable transient simulation. An exceptionally broad bandwidth combined with optimum peak/RMS current gives the PPS 390AMXT Power Source the ability to produce high quality, low distortion output power into the most dynamic loads.

Features and Specifications of the Pacific Power Source 390AMXT Power Source include:

Features:

• IEEE-488.2 or RS-232C with SCPI compatibility
• Now compatible with UPC Studio graphical user interface
• LabVIEW for Windows®/LabWindows® drivers
• Waveform Creation by Harmonic Synthesis
• Graphical Analysis (Voltage and Current)
• Harmonic Analysis (Voltage and Current)
• Metering of RMS and Peak Values
• Continuous Self Calibration (CSC)
• Line Sync Option
• 6:1 Peak Current Capability
• Low Impedance for EN61000-3-2, 3 Testing
• Programmable Output Impedance
• Up to 0-300 VAC Direct Coupled Out
• 1 Phase / 3 Phase Switch Selectable
• 20-5000 Hz Full Power Bandwidth
• Power Levels from 500 VA to 12 kVA standard; 30kVA optional
• Externally Referenced Meter Calibration
• CE and ETL Mark available

Capabilities:

• May be equipped with either a digitally programmable Oscillator/Controller (UPC type) or a manually controlled Oscillator (UMC type).
• May be controlled to operate on either a 0-135 VAC range or a 0-270 VAC range. Three phase models are additionally switchable to 3ø/1ø output power form.
• Total control of the output power form and the selection of either the direct output or the additional transformer output is available from the front panel or the bus.
• All operating functions may be controlled from either the front panel or from a remote RS-232 or IEEE 488.2/ SCPI BUS. LabVIEW for Windows® and LabWindows® Instrument Drivers are available.

Specifications:

• Rated Power:  9kVA
• Max Power: 14.5kVA
• Output Form:  3Ø
• Output Volts-Max (Vrms) : 135/270  135 (L-N)
• Output Amps (Arms):  72/24  24/Ø
• Output Amps (Apeak): 330/110  110/Ø
• Input Power Form :  3Ø
• Panel Height (In. + U): 28-16U (2 each × 14?)
• Weight (lbs.): 175 × 2

Click to see all the models in this series