Agilent MSOX3052A, Keysight MSOX3052A, HP MSOX3052A
Oscilloscope, 500 MHz, 2 + 16 Chs., 4 GSa/s

Download Product Datasheet

Product Overview

RENT KEYSIGHT MSOX3052A (Agilent) OSCILLOSCOPE (Call for Availability)

The Agilent MSOX3052A is a two-channel model in the InfiniiVision 3000 X-Series. Engineered with breakthrough technology this upgradable oscilloscope provides superior performance and functionality. Its unique 5-instruments-in-one design delivers more scope for the same budget.

Features and Specifications of the Keysight MSOX3052A Oscilloscope include:

Features of the Agilent MSOX3052A include:

• One million waveforms per second update rate
• MegaZoom IV smart memory technology
• Large 8.5-inch WVGA display
• Optional segmented memory
• Industry's first 5-instruments-in-1:
• Oscilloscope  
• Digital channels
• Built-in 20 MHz function/arbitrary waveform generator with modulation
• Integrated digital voltmeter
• Protocol analyzer
• Investment protection with Industry's only fully-upgradable oscilloscope, including bandwidth up to 1 GHz
• Industry's leading applications solution

Specifications of the Keysight MSOX3052A include:

• Bandwidth (-3 dB):  500 MHz
• Calculated rise time (10 - 90%):  ≤ 700 ps
• Input channels:
• 2 analog channels
• 16 digital channels
• Maximum sample rate:
• 4 GSa/s half channel
• 2 GSa/s all channel
• Maximum memory depth:
• Standard 2 Mpts
• Optional 4 Mpts
• Optional segment memory
• Display size and type:  8.5 WVGA display
• Waveform update rate:  > 1 million waveforms per second
• Number of active probes supported:  In general, one for 2-channel models
• Vertical system analog channels:
• Hardware bandwidth limits:  Approximately 20 MHz (selectable)
• Input coupling:  AC, DC
• Input impedance:  Selectable:  
• 1 MΩ ± 1% (14 pF)
• 50 Ω ± 1.5%
• Input sensitivity range:  1mV/div to 5 V/div (1 MΩ and 50 Ω)
• Vertical resolution:  8 bits (measurement resolution is 12 bits with averaging)
• Maximum input voltage:
• 300 Vrms, 400 Vpk
• Transient overvoltage 1.6 kVpk
• With N2862A, N2863A, N2890A 10:1 probe: 300 Vrms
• Frequency de-rating (assumes sine wave input): 400 Vpk until 40 kHz, then de-rates at 20 dB/dec until 6 Vpk
• DC vertical accuracy:  ±[DC vertical gain accuracy + DC vertical offset accuracy + 0.25% full scale]
• DC vertical gain accuracy: ± 2.0% full scale
• DC vertical offset accuracy:  ± 0.1 div ± 2 mV ± 1% of offset setting
• Channel-to-channel isolation:  > 100:1 from DC to maximum specified bandwidth of each model (measured with same V/div and coupling on channels)
• Offset range:
• ± 2 V (1 mV/div to 200 mV/div)
• ± 50 V (> 200 mV/div to 5 mV/div)
• Vertical system digital channels:
• Digital input channels:  16 digital (D0 to D15. pod 1:D7 ~ D0, Pod 2: D15 ~ D8)
• Thresholds: Threshold per pod
• Threshold selections:  TTL (+1.4 V), 5V CMOS (+2.5 V), ECL (-1.3 V), user-defined (selectable by pod)
• User-defined threshold range:  ± 8.0 V in 10 mV steps
• Maximum input voltage:  ± 40 V peak CAT l; transient overvoltage 800 Vpk
• Threshold accuracy:  ± (100 mV + 3% of threshold setting)
• Maximum input dynamic range:  ± 10 V about threshold
• Minimum voltage swing:  5 mVpp
• Input impedance:  100 kΩ ± 2% at probe tip
• Input capacitance:  ~8 pF
• Vertical resolution: 1 bit
• Horizontal system analog channels:  
• Time base range:  1 ns/div to 50 s/div
• Time base accuracy:  25 ppm ± 5 ppm per year (aging)
• Time base delay time range:
• Pre-trigger:  Greater of 1 screen width or 250 μs  
• Post-trigger:  1 s to 500 s
• Channel-to-channel deskew range:  ± 100 ns
• Δ Time accuracy (using cursors):  ± (time base acc. x reading) ± (0.0016 x screen width) ± 100 ps
• Modes:  Main, zoom, roll, XY
• XY:
• On channels 1 and 2 only, Z Blanking on ext trigger input, 1.4 V threshold  
• Bandwidth:  Maximum bandwidth
• Phase error at 1 MHz: < 0.5 degree
• Horizontal system digital channels:  
• Minimum detectable pulse width:  5 ns
• Channel-to-channel skew:
• 2 ns (typical)
• 3 ns (maximum)
• Aquisition system:
• Maximum analog channels sample rate:  
• 4 GSa/s half channel interleaved
• 2 GSa/s all channel
• Maximum analog channels record length:
• 2 Mpts half channel interleaved, 1 Mpts all channel (standard)
• 4 Mpts half channel interleaved, 2 Mpts all channel (optional with DSOX3MEMUP (-040))
• Maximum duration of time captured at highest sampling rate (all analog channels):  500 us with 4M memory upgrade
• Maximum digital channels sample rate:  1 GSa/s
• Maximum digital channels record length:  
• 1 Mpts (standard with digital channels only)
• 2 Mpts (optional with DSOX3MEMUP - with digital channels only)
• Modes:
• Normal:  Default mode
• Peak detect:  Capture glitches as narrow as 250 ps at all time base settings
• Averaging:  Selectable from 2, 4, 8, 16, 64, ... to 65,536
• High resolution:
• Real time boxcar averaging reduces random noise and effectively increases vertical resolution
• 12 bits of resolution when ≥ 10 μs/div at 4 GSa/s
• or ≥ 20-μs/div at 2 GSa/s
• Segmented:
• Segmented memory optimizes available memory for data streams that have long dead times between activity
• Maximum segments = 1000
• Re-arm time = 1 μs (minimum time between trigger events)
• Trigger system:
• Trigger sources:  Analog channel  (1~4), digital channel (D0~D15), line, external, WaveGen (1 or mod) (FM/FSK)
• Trigger modes:
• Normal (triggered): requires trigger event for scope to trigger
• Auto : triggers automatically in absence of trigger event
• Single: triggers only once on a trigger event, press [Single] again for scope to find another trigger event, or press [Run] to trigger continuously in either Auto or Normal mode
• Force:  front panel button that forces a trigger
• Trigger coupling:  
• DC: DC coupled trigger
• AC: AC coupled trigger, cutoff frequency: < 10 Hz (internal);
• High frequency reject:  cutoff frequency ~ 50 kHz
• Low frequency reject:  cutoff frequncy ~ 50 kHz 
• Noise reject:
• • Selectable OFF or ON
  • Decreases sensitivity 2x
• Trigger holdoff range: 40 ns to 10.00 s  
• Trigger sensitivity:
• Internal: < 10 mV/div: greater of 1 div or 5 mV; ≥ 10 mV/div: 0.6 div
• External:
• 200 mVpp from DC to 100 MHz
• 350 mVpp 100 MHz to 200 MHz
• Trigger level range:
• Any channel:  ± 6 div from center screen
• External:  ± 8 V

Click to see all the models in this series