RENT Fluke 700PTP-1 Pneumatic Test Pump (Call for Availability)
The Fluke 700PTP-1 Pneumatic Test Pump can be used as a standalone low pressure module and is ideal for calibrating pressure up to 600 PSI/40 bar. It is compatible with the Fluke 700 series pressure modules or test gauges. It can be directly connected to the reference port consolidating two separate pieces when performing pressure calibration and testing and can also be used with 717 pressure calibrators. Fluke 700PTP-1 Pneumatic Test Pump is widely used in Pressure instrument calibration, Pressure instrument Maintenance, Petro-Chemical, Oil and Gas, Pharmaceutical, Water and wastewater, Food and Beverage and Power Generation industries.
The Fluke 700 PTP-1 Pneumatic Test Pump boats an adjustable stroke length that can be set to limit the pressure per stroke. It features an integral pressure adjustment vernier which varies the pressurized volume by 2.0 cc over approximately eleven turns of the vernier knob. The pressure variation achievable with the vernier will depend on the nominal pressure and total pressurized volume, but with a minimum volume and maximum pressure, the vernier provided 360 - 20 psi adjustment range. Fluke 700PTP-1 Pneumatic Test Pump is easy to clean without the need for disassembly and the vernier can be used as a stand alone low pressure calibration source.
Specifications for the Fluke 700PTP-1 Pneumatic Test Pump Include:
Size (L x W x D) | 8.7 x 4.8 x 3.5 in (220 x 122 x 89 mm) |
Weight | 1.03 lb (467 g) |
Vacuum Range | -12.7 psi or -.87 bar |
Pressure Range | Up to600 psi or 41 bar |
See Datasheet for full specifications
Testimonials |
I thought of no place else to try first but you. -- Tony Fremont, CA |