RENT AMPLIFIER RESEARCH 30W1000B RF Amplifier (Call for Availability)
The Amplifier Research 30W1000B is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability. Included is a front panel gain control which permits the operator to conveniently set the desired output level. There is a digital display on the front panel to indicate the operate status and fault conditions when an over temperature, power supply, or amplifier fault has occurred.
The 30W1000B, when used with an RF sweep generator, will provide a minimum of 30 watts of swept power. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. The Amplifier Research 30W1000B includes digital control for both local and remote control of the amplifier. This 8-bit RISC microprocessor controlled board provides both IEEE-488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions.
Specifications for the Amplifier Research 30W1000B RF Amplifier Include:
Frequency | 1MHz - 1000MHz |
Rated Output Power | 30W |
Gain | 45 dB min |
See Datasheet for full specifications
This model has been replaced by the Amplifier Research 25U1000
Testimonials |
Wow, you are good! Thanks for all the information and thank you for your help! Much appreciated! -- Carolyn Maryland |