Agilent / HP 6843A Harmonic / Flicker Test System, 4800VA

The Agilent / HP 6843A Harmonic / Flicker Test System is designed for testing products for compliance to the low-frequency emissions regulations for quasi-stationary current harmonics, fluctuating current harmonics, and voltage fluctuations and flicker. The Agilent 6843A provides full power coverage of the single phase regulatory standard requirements. The HP 6843A combines all of the generation and measurement functionality reqiured for full complance testing in one compact unit. Each 6843A includes the capabilities of a standalone ac source, power analyzer, flicker meter, and line impedance network. All regulatory testing functionality is available via the GPIB and test system software.

Low distortion power generation, low and programmable output impedance, and an accurate measurement system assure complinace level performance.

Unlike multiple-box AC Source and measurement configurations, the power generation and measurement of the 6843A is controlled by a common internal timebase and is truly synchronized. This allows precise measurement of harmonics since they will fall directly within the center of the FFT bins with with a sync with a synchronization accuracy better than 1 ppm. 

The Agilent 6843A Harmonic / Flicker Test System includes a Windows based software package which provides the following capbabilities:

• Test set-up and execution
• Pre-test for EUT class determination (current harmonics)
• Data archiving of all parameters
• Real-time test data display (graphical and tabular)
• On-line / off-linetest data review with user-specified search criteria
• Functions as an AC Power Source
• Test termination under user-defined conditions
• Pass / Fail indication
• Dagnosis of test results via advanced features
• Report generation

Features of the Agilent / HP 6843A Test System include:

• One-box solution tests products for compliance to existing and standards for: IEC 555-2, IEC 555-3, EN 60555-2, EN 60555-3, IEC 1000-3-2, IEC 10003-3, EN 61000-3-2, and EN 61000-3-3
• Full 1 phase coverage at 230 Vrms and 16 Arms
• Measurement and generation implementation compliant with IEC 868, IEC 1000-4-7, and IEC 725
• Compliant-level current harmonic measurements for the fundamental through the 40th harmonic
• Includes Windows® graphical user interface for Harmonic and Flicker Emissions Tests
• Real-time and off-line test data review and analysis
• Test report generation
• Advanced diagnostic capabilities for failure analysis
• Free Graphical User Interface to operate as a standard ac source in normal mode
• VXI plug&play drivers
• Additional IEC test software modules available to expand your testing capabilities