Rent Amplifier Research 1500W1000 Amplifier (Call for availabilty):
The Amplifier Research 1500W1000 is a self-contained, air -cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Amplifier Research 1500W1000, when used with an RF sweep generator, will provide a minimum of 1500 watts of RF power.
The Amplifier Research 1500W1000 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of Forward Power and Reflected Power plus amplifier status. Special features include a gain control, internal automatic level control (ALC) with front panel control of the ALC threshold, forward and reflective RF sample ports for precise power measurements and RF output level protection. Protection is provided by DC current level sensing of all output stages.
All amplifier control functions and status indications are available remotely in GPIB/IEEE- 488 format and RS-232 hardware and fiber optic, USB and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.
Housed in a single equipment rack, the 1500W1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and as a driver for frequency multipliers and higher power amplifiers. A safety interlock can be implemented via a rear panel connector. The 1500W1000 has the ability to be upgraded at a later date to the 2000W1000C, 3000W1000B, or 4000W1000B.
Functions and Specificaltions of Amplifier Research 1500W1000 Amplifier Includes:
RATED OUTPUT POWER: 1500 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3 dB compression: Nominal 1600 watts,
1500 watts min up to 500 MHz,
1300 watts from 500 to 1000 MHz
POWER OUTPUT @ 1 dB compression: Nominal 1400 watts,
1300 watts min up to 500 MHz;
1200 watts min from 500 to 1000 MHz
FLATNESS: ±2.0 dB maximum; ±1.5 dB typical
FREQUENCY RESPONSE: 80–1000 MHz instantane- ously
GAIN (at maximum setting): 61.8 dB minimum
GAIN ADJUSTMENT (continuous range): 25 dB mini- mum
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum; 1.3:1 typical
OUTPUT IMPEDANCE: 50 ohms nominal
MISMATCH TOLERANCE: 100% of rated power with- out foldback.
Will operate without damage or oscillation with any
magnitude and phase of source and load impedance.
MODULATION CAPABILITY: Faithfully reproduces AM, FM, or
Pulse modulation appearing on input signal.
HARMONIC DISTORTION: Minus 20 dBc maximum at 1200 watts,
-20 dBc typical @ 1500 watts
THIRD ORDER INTERCEPT POINT: 68 dBm typical NOISE FIGURE:
8 dB maximum, 6 dB typical
PRIMARY POWER (specify voltage): 200-240 VAC, 50/60 Hz,
three phase, 7000 watts
Testimonials |
We received the unit today. Thank you for this. Your team did an excellent job. -- Bruce D. Phoenix, AZ |